The SIGHTMARK Strikon VMP 1–4×22 SFP Fiber Riflescope brings a fresh take to compact optics. It blends the speed of a red dot with the reach and precision of a low-power variable optic (LPVO).
Let’s dig into how its prismatic design, advanced reticle, and rugged build all come together. Can it really fix those old headaches with LPVOs and boost performance for both close-quarters and mid-range shooting?
Bridging the Gap Between Red Dots and LPVOs
Shooters have long faced a choice: grab the fast target acquisition of red dot sights or the flexibility of LPVOs. The Strikon VMP aims to bridge that gap.
It delivers true 1× magnification in a compact prism optic, but you still get up to 4× for those longer shots. Unlike most scopes, its prismatic build is tuned for a quick sight picture.
You don’t get that “tunnel effect” at low magnification, which is a relief.
True 1× Magnification and Prismatic Design
The Strikon VMP’s true 1× magnification lets you shoot with both eyes open. It feels natural, with barely any distortion and no digital tricks.
That’s a big deal in close-quarters where every millisecond counts. The prism-based optic gives you a wide, bright field of view and forgiving eye relief.
This setup cuts down on eye strain and makes it easy to get behind the optic fast. You don’t get that annoying tunnel vision that plagues so many LPVOs.
CRF-4 MIL Reticle and Daylight-Bright Illumination
The Strikon VMP runs a CRF-4 MIL reticle that’s clean and easy to use. It gives you intuitive holdovers for various distances without cluttering up your view.
The reticle sits in the second focal plane, so the markings always look the same at any magnification.
In the center, there’s a fiber-illuminated dot that stays visible even in full daylight. That’s crucial for tactical or competition shooting.
Second Focal Plane with Fiber-Illuminated Center Dot
The fiber-illuminated center dot pops in bright sun. It gives you the speed of a red dot and the precision of a calibrated reticle.
Since the reticle doesn’t scale with magnification, many shooters appreciate the consistent holdover references. This setup helps you switch quickly from close-up shots to more careful, longer-range engagements.
The MIL-based structure of the CRF-4 offers precise elevation and wind holds.
11 Brightness Settings and Night Vision Compatibility
The illumination system gives you 11 brightness levels. You can dial in the reticle intensity for just about any environment.
Two settings are night vision compatible, so you can pair the scope with image intensifiers for low- or no-light work. This wide range means you won’t lose your reticle indoors or wash out your target in the sun.
Shake Awake Technology and Power Management
Modern optics need to stay ready but not chew through batteries. The Strikon VMP uses motion-sensing electronics to strike that balance.
Its Shake Awake system keeps the optic at the ready but saves power when you set your rifle down.
Always Ready, Efficiently
With Shake Awake technology, the riflescope turns itself on when it senses movement. If you leave it idle, it powers down.
That means the optic’s awake when you grab the rifle, and you’re less likely to find a dead battery at the worst time. Smart power management stretches out battery life, so you don’t have to fiddle with the settings all the time.
Rugged Construction for Real-World Conditions
Optics meant for real-world use have to take a beating. The Strikon VMP uses a tough 6061-T6 aluminum housing for reliability under tough conditions.
Durability, Waterproofing, and Recoil Resistance
The riflescope’s body uses 6061-T6 aluminum—the same stuff you’ll find in aerospace and defense gear. It’s rated IP67 waterproof, so it shrugs off dust and can handle being dunked in water for a bit.
The optic is shockproof and fully sealed. It stands up to heavy recoil and rough environments without losing zero or fogging up inside.
Flexible Mounting and Aimpoint Micro Compatibility
The Strikon VMP ships with a 39 mm centerline mount that matches the Aimpoint Micro footprint. That makes it a breeze to mount on modern carbines and patrol rifles.
You get a 10 mm riser in the box, so you can tweak the optic height for your stock or shooting style. It even supports co-witnessing with backup iron sights if that’s your thing.
Addressing Common LPVO Limitations
Traditional LPVOs can feel bulky, have tight eye boxes, and make fast target reacquisition tough at low power. The Strikon VMP takes those problems head-on.
With its prismatic optics, daylight-bright reticle, and compact design, it really does feel like a streamlined solution for shooters who want CQB speed and mid-range precision.
A Versatile Solution for Modern Shooters
The SIGHTMARK Strikon VMP 1–4×22 SFP Fiber Riflescope stands out as a versatile, rugged optic for today’s shooters.
It delivers:
If you’re after a compact option that skips the bulk of traditional LPVOs but still gives you speed and reach, the Strikon VMP feels like a smart, field-ready pick. It’s that sweet spot between red dot sights and variable-power scopes—finally, right?
Here is the source article for this story: Strikon VMP 1-4×22, the new prism optic